In this blog I will do my best to describe the process I went through in turning my 1957 Ranch-style house into a 2006 Craftsman house as inspired by the Gamble House in Pasadena. Please feel free to comment on anything I write and ask questions as it is the only way we learn.

Note: Since completion of the house I have also decided to allow guest bloggers to post articles related to remodeling. This continues the education process.


TIMELINE
Architect Selection - December 2002 through January 2003
Getting a Permit - January 2003 through November 2004
Construction - November 2004 through September 2006
Post Construction - October 2006 through ???



Time to Redesign the Bathroom

Today's GOTCHA. I was at the house looking around at the framing on the second floor and noticed that the master bath window seemed much larger than what I had remembered so I pulled the drawings and measured it. It says the window should be 4 feet wide with a 4 foot wide shower. Then I looked at the window schedule and saw that 2, 2'-6" windows were to be ordered for the spot. Now my shower would be quite narrow. I decided to swap the shower with the counter at the opposite corner of the room. This will not only give me a larger shower but will move all of that plumbing to the outer wall of the house between the tub and toilet. A win-win in my opinion.
Add/Review Comments


The Steel Beam is Installed

Steel beam installed to support balcony.
The 22 foot, 1,200 pound steel beam was put in place today and nobody got hurt. ;o)
This beam was put in to support the second floor balcony.


Add/Review Comments


Next Page

Be sure to browse the 2,000 picture Photo Gallery for more step-by-step construction details.