In this blog I will do my best to describe the process I went through in turning my 1957 Ranch-style house into a 2006 Craftsman house as inspired by the Gamble House in Pasadena. Please feel free to comment on anything I write and ask questions as it is the only way we learn.

Note: Since completion of the house I have also decided to allow guest bloggers to post articles related to remodeling. This continues the education process.


TIMELINE
Architect Selection - December 2002 through January 2003
Getting a Permit - January 2003 through November 2004
Construction - November 2004 through September 2006
Post Construction - October 2006 through ???



Water Flow Issues

Now that the house is about 7 years old, things are starting to break.
Both latches on the exterior doors need repairs, the nice wood deck built around the palm tree needs to be replaced due the trees expanding girth, all circuit boards have been replaced in every appliance right after the 5-year warranty expired, etc.

One of the most recent, and confusing, issues has to do with my water flow. If you remember in earlier blog posts, I wrote how the plumbing was designed so that I could turn on multiple showers, dishwasher, washing machine, etc., all at the same time and not notice any drop in water pressure. Well something has happened somewhere where only one shower can be on and the pressure is noticeably reduced. I have no idea if it is actually lower water pressure from the city due to the drought conditions in California or if my tankless water heater is clogged up. Does anyone have any ideas on how to go about checking this out? Please comment below if you do.

In hindsight, when the plumbing was put in, I should have installed a flow meter to help monitor water consumption. It would be a real easy test to check the flow if I had one installed right now.

UPDATE 1/22/15: Exactly one year later and I finally solved my water flow issues. It really didn't take that long but it got bad enough where I had to do something about it.
I unscrewed my 8" shower head and lo and behold it was clogged with about 1" of sediment at the filter. I rinsed it out and a few weeks later the problem came back. I went through this process a few times as I think the California drought is causing extra sediment to get into the water supply due to the low reservoirs. Also, the extra minerals are causing all kinds of hard water stains and clogging of the tiny orifices in the shower head. I took a Dremel and a wire brush attachment to polish off all the deposits. It worked great and now my pressure is back to normal.

Out of curiosity, I went to a faucet down in the laundry room where I can easily unscrew the filter. Guess what? An inch of sediment in there as well. I'm routinely going around the house and emptying sediment now about once every month or so.

So what do you do to fix this? I think I need to bite the bullet and put in a whole house soft water unit. UGH!
Add/Review Comments


Cabinets, Plumbing, Electrical, Insulation, Surround Sound, Roof Work, Shower Mopped,.....

I have been really busy and haven't had time for updates. I have finally organized the new pictures since my last posting on 4/16/05. I will load them up sometime this week, I promise. Here are the latest issues.
• All plumbing and electrical in the master bathroom has to shift to the left by about a foot since we had a designer lay out the cabinets.
• All insulation has been put in.
• I installed in-ceiling speaker brackets for surround sound in the living room.

Ceiling Speaker Bracket Installed


• Copper flashing is going on the roof.

Copper Flashing Installed on Roof


• The shower has been hot-mopped. We were told to pick out all bathroom tile and balcony and laundry room flooring this week.

Hot Mopped Shower


• Skylights have been framed.

Framed Skylight


• The kitchen range vent has been put in place. One of the joists had to be moved over and plumbing rerouted to make room.
• The Thermador range and Thermador dishwasher were delivered last week. I found a place in Alabama (Fredrickson's Tire and Appliance) with amazing prices through eBay. They were clearing out a supply of Thermador appliances from a warehouse that closed down. They bought everything up and were liquidating at wholesale prices.
• With the extended garage roof you now hit your head when walking around the corner. So, we dug down about 2 feet around the garage to lower the grade.

Add/Review Comments


Low Voltage Wiring, Electrical, Plumbing, Garage Door Ordered, Issues in the Kitchen

• Still working on updating the pictures. They should be coming within the week.
• There is still quite a bit to do before inspection. We had a telecom installer come out and install phone (Cat 5), cable TV (RG6), and Ethernet (Cat 6). There was about 1700 feet of ethernet wiring installed. It's easier to put it in now than later. For example, it's behind TVs, in the kitchen, etc. I won't be using it but in 10 years or so it may be needed for home automation purposes. It's also a good selling point if I ever go down that path.
• Wall sconces have been wired.
• Plumbing is almost complete. Just finishing up the gas lines.
• The garage door has been ordered from Designer Doors. This is going to be really nice!
• Issues continue to test my patience in the kitchen. There are so many wires, pipes, and ducts running through the ceiling that we are having trouble figuring out how to get a 10" duct from the range hood over about 10" off center to fit between two joists and vent out the wall.
• The ceiling beam patterns are a challenge since we decided to add the kitchen into the remodeling mix. We decided to stop the ceiling beams at the boundary between the kitchen and dining room so the living and dining rooms only have beams. Kitchen ceiling is TBD.
• The remaining part of the block wall on the rear patio was cut down yesterday.
Add/Review Comments


Next Page

Be sure to browse the 2,000 picture Photo Gallery for more step-by-step construction details.