• The patio was poured.
• All doors are now installed except for the front door (being built) and the side door (just ordered it). The side door is made by TM Cobb. It is a Stickley model with a mantel from the Greene door.

Edited October 29, 2005: The actual door interior and exterior.

• Hose bib locations have been identified.

INTERIOR DESIGN STARTING
I had no idea that I was going to be designing the interior of this house on the fly.
• Spent the last few days identifying all lighting that was not on the original plans. This includes wall sconces inside and outside.
• Roughly laid out the beam design separating the living room and dining room.

A lot has happened in the last 2 weeks. Here's the rundown.
• For the past week, I was pushing the masons to hurry up and put in a block wall around part of the patio according to the plans. Amy came over to see it that night and we both decided it was too tall and closed in the patio too much. The following day I had the guys tear it out. It wasn't very fun telling them that.
• Installed all windows. Working on doors now.
• Ordered the master bath plumbing fixtures in oil-rubbed bronze (Phylrich Carrara Beige Marble) and the steam shower system (Mr. Steam)
• The roof is sheeted, now it's ready for waterproofing.

LESSONS LEARNED
• Heating ducts have been a pain in the neck. Multiple small changes have been needed to make the design work. A lesson learned is that none of the subcontractors know how the other is planning on roughing out their lines. As a result, heating ducts start to go in and one by one I tell them why it can't go in a certain spot. A soffit was created upstairs to handle the ducting. Downstairs, ducting is being run without knowledge of the final beam layouts on the finished ceiling. I'm having stuff moved. They wanted to run ducts right where I need my range vented out in the kitchen, etc., etc.
The bottom line is make sure you are on site a lot during the rough-ins to make sure everything works. Only you will know how the end product is going to be used.

Today I helped install the first windows. They look even better than I hoped they would.

The Loewen windows and doors were delivered today. There is a scratch on the 8' french doors. Somebody will need to come out and fix that. I'm told it will be after all exterior work is complete.

• The rough plumbing is going well. Only about 4 more days until it's done.
• The master bathroom shower, sink, and tub fixtures were picked today. They are made by Phylrich - Carrara Beige Model Series. The finish is oil rubbed bronze with the beige marble handles.
• Chose Mr. Steam MS-400T for the master bath steam shower. I purchased it and then found it for about $150 less. Oh well, maybe I'll save next time. This site has everything!

• The electrician started today and mounted electrical boxes around the house. It seems the code of a box every 6 feet is excessive.
• The garage was torn down today due to wood rot and termites in preparation for the new garage framing and roof. This was not part of the original plan.

• Hired John Bauman, landscape designer and former owner of the Begonia Farm Nursery.

Pete Ramage of Ramage Masonry has started the fireplaces and the plumber, Jaime, is putting in the gas lines to them.

The eaves and rafters were stained today using Cabot Stain's Bark color. I had everything brushed so it would reveal the grain better and give it an older look. It worked!!! When the painters first started, they were spraying and we had to stop that fast. Instead of seeing the grain like in this picture, everything looked solid brown.

• Today we finally picked the actual colors of the house. The shingle siding is a clear-coated natural cedar. The window and door trim, rafters, and eaves are Cabot Semi-Transparent redwood stain. The balcony railings and trim are Passion Vine, an olive-green color. All colors except for the siding were actually choices I made after the Art Jury told me what they liked. It was easier that way since it gave me fewer choices.

• Gave Joe Madden of Madden Millworks in San Pedro the go-ahead to start construction of the front door.

I'm working on the front door right now. This picture is a sketch of what I'm trying for with a darker (mahogany) wood. I'm going to do the stained glass myself along the lines of what is shown.

Rough Idea


By the way, the rain is coming again next week. We should get another 2 inches which will push L.A. up to the second rainiest ever. I guess I was just lucky to start building this year during this monsoon season. Maybe we can be number one soon. UGH!
------------------------------------------------------------------------
Modified on 1/23/08
Here is a picture of the actual door at the mill and with the final stained glass. If you look closely at the raw door, you can see the three plugs at the base of the window frame. These remove to allow me to remove the frame and swap out the glass at anytime.

Today's GOTCHA. I was at the house looking around at the framing on the second floor and noticed that the master bath window seemed much larger than what I had remembered so I pulled the drawings and measured it. It says the window should be 4 feet wide with a 4 foot wide shower. Then I looked at the window schedule and saw that 2, 2'-6" windows were to be ordered for the spot. Now my shower would be quite narrow. I decided to swap the shower with the counter at the opposite corner of the room. This will not only give me a larger shower but will move all of that plumbing to the outer wall of the house between the tub and toilet. A win-win in my opinion.